Tracks that fit the house
Select hat-channel, J-profile or two-piece profiles. Coordinate the finish, hole spacing and mounting surface before production.
Permanent Outdoor Lights
Build a permanent outdoor lighting offer around C5204: RGBW light modules, house-matched tracks, control hardware and the components needed for a planned installation.
Start with C5204, 24V and 9-inch spacing
Use the 24V, nominal 9-inch configuration as the starting point for samples, track selection and system planning. A dedicated 3000K white channel supports everyday architectural lighting alongside RGB color effects.
Single-light strings allow individual replacement. Five-light strings provide pre-connected sections for installation. Match the chosen string spacing to the track drawing.
View C5204 Product Details| Selection | C5204 recommended starting configuration |
|---|---|
| Light module | C5204-B / 24V DC |
| Rated power | 0.96W per light |
| Light source | 3 × 5050 LEDs; RGBW with dedicated 3000K white |
| Control interface | SPI; confirm the driver and firmware version with your controller |
| Nominal spacing | 9 inches; confirm hole centers on the approved track drawing |
| String formats | Single-light and five-light strings |
| Housing size | 30mm diameter × 16mm height |
| Beam angle | 120° |
| Housing / module rating | PC housing / IP67 light module |
| Track starting point | Hat-channel profile, approximately 1.1m length, 0.65mm thickness; black or white |
Choose the voltage for the complete system
| Version | Supply voltage | Rated power per light | Selection |
|---|---|---|---|
| C5204-A | 12V DC | 0.86W | For a matching 12V system |
| C5204-B | 24V DC | 0.96W | Recommended starting point for a new G&D SMART configuration |
| C5204-C | 36V DC | 0.96W | Project-specific selection; confirm cable and controller revision |
These are separate voltage variants. They are not interchangeable, and the family designation does not mean one module accepts all three voltages. Certification and installation requirements must be checked for the exact supplied configuration.
Match the hardware to your installation
Control and power together
Discuss 350W or 600W control-box configurations with the output voltage, firmware, branch loads and power-injection layout specified.
Components for the route
Add extension cables, T connectors, Y connectors and signal boosters according to the actual roof layout.
What this means for your business
- For installers: define a repeatable combination of lights, track and wiring components before quoting the job.
- For regional brands: coordinate track colors, module branding and enclosure branding around your own offer.
- For OEM/ODM teams: start with a documented configuration, then agree electrical, mechanical and software changes for your program.
Frequently asked questions
Which spacing options can I request?
Nominal 4, 6, 9 and 12-inch formats are listed. An 8-inch format can be discussed as a custom option. Confirm lead time, string format and track hole centers for the selected spacing.
Can I order a complete sample system?
Yes. Specify your preferred voltage, light count, spacing, track profile and control experience so the sample can include the relevant installation components.
Does IP67 describe the whole installation?
The specification is for the light module. Confirm the ratings and installation conditions of the control box, connectors, cable entries and completed assembly separately.
Explore tracks, wiring and system planning · Compare Permanent Outdoor Lights